|Place of Origin:||China Mainland|
|Minimum Order Quantity:||10 Pieces|
|Packaging Details:||Standard Export Carton|
|Delivery Time:||7-15 days|
|Payment Terms:||T/T, L/C, Paypal, Payoneer|
|Supply Ability:||100 /Pieces per Day|
|Color:||White||Voltage Output:||AC110V Or AC220V|
1.Operating voltage 120~277Vac, 50Hz
2.Rated load 120V@400W;220-240V@800W;277V@1000W
3.HF system 5.8GHz±75MHz, ISM wave band
4.Transmitting power <0.5mW
5.Power consumption ≤0.5W(standby)
6.Detection zone Max.(D x H): 16m x 15m
7.Detection sensitivity 25% / 50% / 75% / 100%
8.Hold time 5s / 30s / 90s / 3min / 20min / 30min
9.Daylight sensor 5Lux/15Lux/30Lux/50Lux/100Lux/Disable
10.Mounting height 15m Max.
11.Motion detection 0.5~3m/s
12.Detection angle 150°(wall installation)360°(ceiling installation)
13.Operating temperature -20℃~60℃
1.Automatic switching based on motion and light level.
2.Zero-crossing point operation helps protect the sensor against in-rush current.
3.Super Compact size makes it suitable to fix within most luminaires.
4.4-pole press-in terminal (L, N, N, L'), easy assembly.
5.Detection area, time delay and daylight threshold can be precisely set via DIP switch.
6.Wide detection area, range up to 16m in diameter.
7.Support higher mounting height 15m Max.
8.MC002 is an innovative and active motion detector with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials.
9.The sensor supplies a simple energy-saving solution to use light only when and where you need it.
It automatically switches on/off light based on motion and ambient light level.
Can control all kinds of lamps, for example, halogen, fluorescent and LED lights.
Compact size and small casing, suitable to fix within most luminaires. 4-pole press-in terminal (L, N, N, L'), very easy to install.
10As it uses the third generation Merrytek technology, normal 5.8GHz microwave module can easily reach high mounting high up to 15m .
This is an innovative motion sensor, switch on the light on detection of movement, and switch off after a hold time when there is no motion detected.
As built-in daylight sensor can read brightness value, the sensor does not switch on the light if with sufficient natural light.