The main converter purpose is to change OC (open collector) HTL signal (24V) into TTL (5V) impulse signal or differential signal , to control the servo system
Support A, B, and Z three-phase differential simultaneous conversion
Industrial Temperature Range: - 45 ~ + 85 ℃
Introduction:
1. The main converter purpose is to change OC (open collector) HTL signal (24V) into TTL (5V) impulse signal or differential signal, 4 channels, electrical isolation between input and output, control the PLC Servo system
2. Working frequency: 500000Hz
3. The Input mode: Accept All NPN or PNP PLC interface.
4. Installation: DIN35mm rail mounting, convenient and quick!
5. Product Size: 63mm x 87mm x 35mm
6. Rated Working Power Voltage: DC24V ( DC14V- DC30V is also available in some condition)
Item Number OC-DIS 4CH HTL to TTL Signal Converter 4 Channels
Application
PLC high speed counters signal conversion
Servo motor control signal conversion
Rotary encoder control signal conversion
Grating ruler output signal conversion
PLC and microcontroller pulse signal conversion
PLC, servo motor control system anti-jamming
Specification
Signals Channels 4
Power Supply 10V - 26V DC, 24V Typical
PNP PLC Connection Capability Yes
NPN PLC Connection Capability Yes
Optically Isolation Yes
Signals Input A/B/C/D HTL Signal 24V DC
Signals Output A+/A-/B-/B+/C+/C-/C+/D+/D- TTL/RS232 Signal 5V DC
Frequency Range 0 - 500000Hz Maximum
Current Consumption 100 mA Maximum, Each Channel
Input Impedance: Optically isolated, 5.8 kOhms at 24V typical
Isolation Voltage 2500V
Led indicator Red light On
Physical Features
Product Dimension 62mm Width x 87mm Length x 41mm Height
Net Weight 58g
Operation Temperature -25°C to 70°C
Terminal Blocks 5.08mm Pitch, Green, Screw Type
Wire Gauge 26 -16 AWG
Mounting Options DIN Rail 35 or 32
Operation Humidity 98% non-condensing
Your message must be between 20-3,000 characters!
